On June 24, 2014, two 532nm laser telecentric scanning lenses independently designed, developed and produced by LENSTEK were officially released. Among them, the TL-532-60-100L model products show excellent quality in the field of laser engraving and glass cutting. LENSTEK technical director: "This product in the high-end laser engraving machine and glass sapphire cutting field can get very good application, a few days ago, our high-end laser engraving customers have intention to our products as their product standard configuration." In addition, with the technological improvement of Apple mobile phones, the industry needs higher precision panel and sapphire cutting solutions, and this telecentric lens product gives the industry a new quality improvement possibility in this regard. At the technical level, domestic laser engraving machine manufacturers mainly use the ordinary F-Theta scanning lens, and the ordinary F-Theta lens will produce obvious distortion with the change of the engraving depth of crystal and glass, resulting in changes in the shape and depth of the engraving spot, especially for the edge of the image. The advantage of the telecentric lens is that the laser engraving process from different angles is perpendicular to the working face, so the quality of the spot is not affected by the depth of the engraving. "

LENSTEK is the leading brand of domestic laser lens, mainly serving high-end laser products customers, LENSTEK telecentric lens products after careful research and development design and processing control, through the test of first-line customers, has obtained very good feedback.

echnical parameters:

Effective focal length: 98.4mm

Working distance: 123.87mm

Maximum scanning range: 60mm x 60mm

Scanning Angle: 22 degrees

M1/M2:20mm/25.4mm

For more detailed technical information, please contact our business department.